One of the elegant forms of LED lighting fixtures is the LED exposed lamp

LED exposed lights are often used in some lively occasions because they come in a variety of colors and are full of variations. It is applied in occasions such as the decoration at the entrance of parks, especially during festivals. It can embellish the festive colors and atmosphere, allowing people to have more beautiful reveries about the new beginning. It is magnificent and captivating. In addition to embellishing the festive atmosphere, it has another very important application, which is the flashing characters on small storefronts. These lights can form a string of lights, and the owner of the storefront can wind them into any characters, offering a high degree of freedom in creation.

The LED exposed lights are used to make the "advertisements" on the storefront that flash, creating a very eye-catching effect. Their brightness is very high and adjustable. It can achieve a very eye-catching effect even during the day. If you add horn music or something like that, how could such a facade not be easily noticed? This type of exposed lamp is usually a series of small light-emitting diodes, and the places where they are welded generally do not have waterproof functions. Therefore, when using it, be sure to put a waterproof box on its back or place the lamp directly in a place where it won't get rained on.

LED exposed lights have a long lifespan. Under normal circumstances, it is no problem for a string of lights to work for four to five years. Moreover, its power is very low. The power of a one-square-meter light string display area is no more than twenty watts. Therefore, the power of a light string with fonts will not exceed ten watts. When installing exposed lights, there may be the problem of drilling holes. When drilling holes, measure the distance accurately, select the appropriate size of the drill bit, and after drilling the first one, test it with a diode until it can be installed with just enough effort. Although it is necessary to apply glue again for reinforcement after installation.